In part 1, we just got pygame going. We have a 1000x1000 pixel canvas, with a 50x50 square moving more-or-less continuously. Snake is played on a fixed grid. Instead of 50x50 pixels, we'll shrink the snake parts/tiles to 20x20, and we'll shrink the canvas to 600x600 pixels, treated as a 30x30 grid. (30 tiles x 20 pixels = 600 pixels.) We'll add three variables to represent these values: W = 30 # width H = 30 # height S = 20 # tile size Now we should replace all other numbers in the code with references to these values. screen = pygame.display.set_mode((W * S, H * S)) dot = pygame.Vector2(W / 2, H / 2) # approx. the center square = pygame.Rect(dot * S, (S, S)) These values are referenced in several places in the code. By using variables, you can update them in one place and it will be reflected everywhere. You can easily change the width, height, or tile size. Add this just above square = ... (the line shown above): if dot.x > W: dot.x = 0 Full code at this point: import pygame W = 30 H = 30 S = 20 # pygame setup pygame.init() screen = pygame.display.set_mode((W * S, H * S)) clock = pygame.time.Clock() running = True dot = pygame.Vector2(W / 2, H / 2) while running: # poll for events for event in pygame.event.get(): # pygame.QUIT = user closed window if event.type == pygame.QUIT: running = False # fill buffer with white screen.fill("white") dot.x += 1 if dot.x > W: dot.x = 0 square = pygame.Rect(dot * S, (S, S)) screen.fill("black", square) # copy buffer to screen pygame.display.flip() # limits FPS clock.tick(20) pygame.quit() Now we are treating the board itself as a 30x30 grid of 1x1 tiles. It is then being scaled up when being drawn. The code dot * S takes the Vector2 variable with a value like (15, 15). Assuming S = 20, dot * S would then produce the point (300, 300), i.e. (15 * 20, 15 * 20).